Products - Cold Cathode

		7.02 Miscela Cold cathode system
		Lumen+ Lumen+ is a high output Cold Cathode system specifically designed as an indirect light source, where the designer is looking for more than a mere lighting effect. A full range of coloured and white tubes can be produced in both 20mm and 25mm diameters (see colour chart). Used with special Lumen+ transformers, this product can be used for many lighting applications where increased lighting intensity is required. [Click here to Download PDF Spec]

		7.02 Lumen+ High output cold cathode system
		Miscela - Colour Changing Cold Cathode System Miscela is an exciting lighting system that enables designers to create stunning colour changing effects within numerous interior applications. The visual characteristic of ceilings, walls and other surfaces can be transformed with Miscela, and when used behind glass or a translucent stretched ceiling fabric, can add a degree of ‘theatre’ to a space. A theoretical 16 million colours can be achieved by mixing and fading three (or four) independently controlled Cold Cathode lamps – coloured red, green and blue (and white if required). The effect can be chased for a dramatic effect or slowly faded for a more subtle colour change. The tubes and control gear for a system are mounted on pressed aluminium reflector assemblies (for straight runs). The tubes are linked to an ALC dimming system to facilitate colour change. Miscela is also compatible with most other industry standard lighting control systems using mains borne dimming, and can also be controlled via DMX512 with the correct transformers. [Click here to Download PDF Spec]

		7.06 Luminiso Hot cathode system
		Luminiso Also available, to special order and specification only, is the new Luminiso “Hot Cathode” linear lighting system. Offering high outputs of 3000 - 4000 lumens per linear metre, Hot Cathode presents a viable alternative to traditional fluorescents in ambient lighting situations; with the added benefit of an immense 40,000 hour lamp life and formable tubes as per normal Cold Cathode. The ø25mm tubes are available in lengths up to 2.4m, with straight-on or turnback electrodes and are available in nearly all the standard colours (not available in coloured glass or double coated versions). Luminiso can be used with electronic or magnetic transformers. Used with magnetic transformers the lamp can be up to 60m from the transformer location. Hot cathode tubes are suitable for interior use only and can not be dimmed. [Click here to Download PDF Spec]