| |
Products - Fibre Optic Kits |
| |
<< Back a Page |
|
| |
 |
 |
8.03 Fibre optics paver kit |
|
ALC Paver Kits are the perfect solution to floor level lighting, for both interior and exterior applications. The end fittings
stay cool and are safe to walk on whilst creating a striking lighting effect. They are manufactured from the highest quality polished stainless steel and glass, and are designed with longevity of life in mind.
They are suitable for installation in wooden floors, decking, paving, stair skirting, concrete, and virtually any other
floor surface. Typical applications include marker lighting for pathways or entrances wall washing, uplighting of columns and archways, wet room or pool area lighting or general mood lighting. Please note that an additional water resistant enclosure is required if the light source is to be located
in a wet environment (see options listed separately).
[Click here to Download PDF Spec] |
|
 |
 |
8.04 Fibre optics mini paver kit |
|
The ALC Mini Paver Kit is the perfect solution for low level accent lighting, for both interior and exterior applications.
The terminations stay cool and are safe to walk on whilst creating a striking lighting effect. This system uses fittings of a
similar design to the ALC Paver Kits, but which are smaller in size and output. The pavers are manufactured from the
highest quality stainless steel and glass, and are designed with longevity of life in mind. They are typically used for marker lighting in stairs and hallways and for decorative use in bathrooms and kitchens.
Suitable for installation in wooden floors, decking, paving, stair skirting, concrete, and virtually any other floor surface. Please note that an additional water resistant enclosure is required if the light source is to be located in a wet environment (seeoptions listed separately).
[Click here to Download PDF Spec] |
|
 |
 |
8.05 Fibre optics colourwash downlight kit |
|
The ALC Colourwash Downlight Kit is designed to alter the atmosphere and mood of a room by changing the colour of the background lighting. The kit is especially effective with white backdrops and creates a stunning effect when used
behind a white voile curtain or in a white bathroom. Please note that this kit is designed to be used to provide accent
lighting only, and not as a main source of light in any room.
[Click here to Download PDF Spec] |
|
 |
|
8.06 Fibre optics spa kit |
|
The ALC Spa Kit is designed to create stunning colour changing effects within baths, spas and jacuzzis. The small
stainless steel end fittings have no electrical wiring to them, removing the usual danger of mixing water and artificial
light. Please note that an additional water resistant enclosure is required if the light source is to be located in a wet environment (see options listed separately).
[Click here to Download PDF Spec] |
|
 |
 |
8.07 Fibre optics colourwash tube kit |
|
The ALC Colourwash Tube Kits are designed to create dramatic lighting effects in places that are traditionally hard
to light such as behind bedheads or under furniture. A stylish polished stainless steel tube with multiple fibre optic heads along its length provides a remarkable amount of light for its size. The tube is mounted using the brackets supplied and can be displayed or discreetly concealed. The system is best used on light or neutral coloured walls and surroundings.
[Click here to Download PDF Spec] |
|
 |
 |
8.08 Fibre optic crystal ceiling kit |
|
The ALC Colourwash Tube Kits aredesigned to create dramatic lighting effects in places that are traditionally hard
to light such as behind bedheads or under furniture. A stylish polished stainless steel tube with multiple fibre optic heads along its length provides a remarkable amount of light for its size. The tube is mounted using the brackets supplied and can be displayed or discreetly concealed. The system is best used on light or neutral coloured walls and surroundings.
[Click here to Download PDF Spec] |
|
 |
|
8.09 Fibre optics star |
|
ALC Star Kits are offered in three sizes, allof which consist of mixed diameter fibres to create a stunning ‘near and far’effect. They are typically designed for installation into a ceiling or floating ceiling raft, but can also be used effectively in walls or even in material (for example curtains). Each kit
comes with small arrowhead bullet lenses for a more diffused look, or alternatively the installer can drill 1mm holes and just
use the fibres on their own for an intense
point of light.
[Click here to Download PDF Spec] |
|
 |
|
8.10 Fibre optics star deck kit |
|
ALC Star Deck Kits create stunning lighting effects when installed in bothinterior and exterior applications. They are typically installed in wooden floors, wooden decking, paving, pathways,stages and steps. Tails can be installed in cement, between paving slabs, stones oreven in grout between tiles. Two kits areoffered that comprise of either 55 or 110
inconspicuous miniature acrylic heads that are almost invisible when not in use.
These heads stay permanently cool and are safe to walk on.
A water resistant enclosure is supplied as standard allowing the light source to be used in a wet area (typically under
decking).
[Click here to Download PDF Spec] |
|
 |
|
8.11 Fibre optics sensory kits |
|
The ALC Sensory Kits are produced from clear sleeved polymer fibres that are cracked to produce a magical sparkle
effect. The absence of electricity and heat in the tails makes them safe to touch and therefore particularly suited to sensory and treatment rooms in hospitals and schools. Colour change stimulates the minds of young children and assists them in identifying different colours. It has also
been found to be beneficial for children of any age with learning difficulties. The fibre optic side glow is also frequently
used as decoration in the home or in commercial properties such as cafes, bars and restaurants.
[Click here to Download PDF Spec] |
|
 |
 |
8.12 Fibre optics star cloth kit |
|
The ALC Star Cloth Kit consists of a user specified number of polymer fibre tails glued into a custom made fire retardant
black backdrop cloth. It comes with ties along all edges and is ready to hang, or drape across a ceiling. The kit is supplied
with a standard colour wheel and an additional twinkle effect wheel can be specified to create ‘movement’. Star cloths
have traditionally been used to great effect , in bars, nightclubs and other commercial venues. However, this technology is now offered for use in domestic applications.
Custom star cloths are made to suit specific room sizes and extra large cloths for commercial venues can also be
produced to order. For more information
please contact The ALC Sales Team.
[Click here to Download PDF Spec] |
|
 |
 |
8.13 Fibre optic kit accessories. |
|
A range of colour wheels, twinkle wheels, water resistant enclosures are available for the Fibre optic kits. Replacement lamps are also available.
[Click here to Download PDF Spec] |
|
|
|
