 |
 |
8.20 Raspa LED pavers |
|
Raspa is a miniature LED fitting designed for recessing into walls or floors. The housing is produced from anodised black
aluminium or stainless steel and features a high protection rating of IP68, making it suitable for interior or exterior use. The fitting uses a single Luxeon LED and a range of optics can be selected to alter the distribution of light from narrow to
wide angle. The housing is retained in the sleeve by rubber ‘O’ rings.
[Click here to Download PDF Spec] |
|
 |
 |
8.21 Vagere adjustable LED paver |
|
Vagare is designed for recessing directly into walls or floors. The housing is produced from hard anodised aluminium
with a stainless steel or brass bezel and is sealed to IP67 making it suitable for interior or exterior use. The fitting uses a single Luxeon LED that can be specified in both 1W and 2W versions and a range of optics can be selected to alter the
distribution of light from narrow to wide angle. The lens assembly is adjustable and can be inclined by 20º. The housing is retained using four countersunk fixings.
[Click here to Download PDF Spec] |
|
 |
|
8.22 Valere LED wall luminaires |
|
Valere is designed for recessing into interior walls. The housing is produced from brass with aluminium inserts and
features a high protection rating of IP44. The fitting uses a single Luxeon LED that can be specified in both 1W and 2W
versions and a range of optics can be selected to alter the distribution of light from narrow to wide angle. The housing is
retained by two sprung steel spring clips.
[Click here to Download PDF Spec] |
|
 |
|
8.22 Vampata LED wall luminaires |
|
Vampata is designed for recessing into interior walls. The housing is produced from brass with aluminium inserts and
features a protection rating of IP44. The fitting uses a single Luxeon LED that can be specified in both 1W and 2W versions
and a range of optics can be selected to alter the distribution of light from narrow to wide angle. The lens assembly is
adjustable and can be inclined by 20º. The housing is retained by two sprung steel spring clips.
[Click here to Download PDF Spec] |
|
 |
|
8.23 Zerbino decorative LED marker light |
|
The Zerbino range of acrylic saucers are designed to provide marker lighting for pathways, or simply to provide accent
lighting to counters, decking, walls or display areas. The fixture is available in two sizes, the smaller containing a single
high output Luxeon LED, the larger with either one or three Luxeon LEDs. The latter can be specified in colour changing
RGB or single static colours. The saucer is produced from moulded frosted acrylic and is sealed to IP66 for indoor or outdoor use. It is supplied with a 1.5 metre connection lead.
[Click here to Download PDF Spec] |
|
 |
|
8.24 Zeppa decorative LED marker light |
|
The Zeppa range of acrylic bricks are designed to provide marker lighting for pathways, or simply to provide accent
lighting to walls or display areas. The fixture is available in two sizes, the smaller containing a single high output Luxeon
LED, the larger with either one or three Luxeon LEDs. The latter can be specified in colour changing RGB or single static
colours. The brick is produced from moulded acrylic that has been frosted to aid diffusion. It is sealed to IP66 for indoor
or outdoor use and is supplied with a 1.5 metre connection lead.
[Click here to Download PDF Spec] |
|
 |
|
8.25 Bachetta LED paver |
|
Bachetta is a ground buried micro sized walkover LED uplight designed for delineating pathways. The fixture utilises
a single high output Luxeon LED that can be specified in a range of static colours. The bezel is manufactured from either
stainless steel or anodised aluminium. The housing is sealed to IP66 making it suitable for indoor and outdoor use and
is supplied with a 1.5 metre connection lead.
[Click here to Download PDF Spec] |
|
 |
 |
8.26 Bagliore LED paver |
|
Bagliore is a ground buried walkover LED uplight designed for delineating pathways and providing accent lighting to architectural details. The fixture utilises 3 high output Luxeon LEDs which can be specified in colour changing RGB or
single static colours. The bevelled bezel is manufactured from stainless steel and retains the frosted toughened cover glass.
The housing is sealed to IP64 making it suitable for indoor and outdoor use (not suitable for areas where excessive
exposure to moisture will occur). It is supplied with a 1.5 metre connection lead.
[Click here to Download PDF Spec] |
|
 |
|
8.27 Visione LED wall luminaire |
|
Visione is designed for semi-recessing into interior walls, ideal for marker lighting and stair treads. The bezel is produced from brass, and is available in a variety of painted and plated finishes. The impact resistant opal polycarbonate diffuser achieves a high protection rating of IP65. The fitting incorporates 6 LEDs which are available in a variety of colours, and create an evenly diffused soft glow. The body is retained in the wall by screws, and the bezel then twist and locks onto the body.
[Click here to Download PDF Spec] |
|
 |
|
8.28 Zodiaco decorative LED marker light |
|
The Zodiaco range of recessed acrylic bricks are designed to provide marker lighting for pathways, walls or display areas. The fixture is available in two sizes, the smaller containing a single high output Luxeon LED, the larger with either one
or three Luxeon LEDs. The latter can be specified in colour changing RGB or single static colours. The brick is produced from moulded acrylic that has been frosted to aid diffusion, and the bezel from either stainless steel or anodised aluminium. Both sizes are sealed to IP66 for indoor or outdoor use and are supplied with a 1.5 metre connection lead.
[Click here to Download PDF Spec] |
|
 |
|
8.29 Cerchio LED paver |
|
Cerchio is a ground buried walkover LED uplight designed for delineating pathways and for providing accent lighting to
highlight architectural details. The fixture utilises either 3 or 6 high output Luxeon LEDs which can be specified in colour
changing RGB or single static colours. A range of optics can be selected for the 3-LED version to alter the distribution
of light from narrow to wide angle. The bezel is manufactured from anodised aluminium or stainless steel and retains the toughened cover glass, which can be specified as either clear or frosted. The housing is sealed to IP64 making it suitable
for indoor and outdoor use (not suitable for areas where excessive exposure to moisture will occur). It is supplied with a 1.5 metre connection lead.
[Click here to Download PDF Spec] |
|
 |
|
8.30 Bruma LED paver |
|
Bruma is a ground buried walkover LED uplight designed for delineating pathways and for providing accent lighting to
highlight architectural details. The fixture utilises either 3 or 6 high output Luxeon LEDs which can be specified in colour
changing RGB or single static colours. A range of optics can be selected for the 3-LED version to alter the distribution of light from narrow to wide angle. The bezel is manufactured from anodised, aluminium, with chrome and stainless steel also available, and retains the toughened cover glass, which can be specified as either clear or frosted. Both circular and square versions are available, and optional recessing sleeves
can be specified, if required. The housing is sealed to IP67 making it suitable for indoor and outdoor use and is supplied
with a 1.5 metre connection lead.
[Click here to Download PDF Spec] |
|
 |
|
8.31 Coltello LED paver |
|
Coltello is a ground buried drive-over LED uplight designed for marker lighting and for providing accent lighting to architectural details such as columns. The fixture utilises 12 high output Luxeon LEDs which can be specified in colour changing RGB or single static colours. A range of optics can be selected to alter the distribution of light from narrow to wide angle. The bezel is manufactured from stainless steel, or
from chrome plated / anodised aluminium. This retains the toughened cover glass, which can be specified as either clear or frosted, and a gasket seals the unit to IP67. Both circular and square versions are available and optional recessing
sleeves can be specified, if required. The fixture is supplied with a 1.5 metre connection lead.
[Click here to Download PDF Spec] |
|
 |
|
8.32 Cometa LED paver |
|
Cometa is a ground buried drive-over LED uplight designed for marker lighting and for providing accent lighting to
architectural details such as columns. The fixture utilises 18 high output Luxeon LEDs which can be specified in colour
changing RGB or single static colours. Three beam angles can be selected to alter the distribution of light from medium to wide angle. The bezel is manufactured from stainless steel, or from chrome plated / anodised aluminium, and can
be supplied with either a bevelled or flat profile. This retains the toughened cover glass, which can be specified as either
clear or frosted, and a gasket seals the unit to IP67. Both circular and square versions are available and optional
recessing sleeves can be specified, if required. The fixture is supplied with a 1.5 metre connection lead.
[Click here to Download PDF Spec] |
|
 |
|
8.20 Razza LED paver |
|
Razza is designed for recessing directly into walls or floors. The housing is produced from stainless steel and features a high protection rating of IP68, making it suitable for interior or exterior use. The fitting uses a single Luxeon LED and a range of optics can be selected to alter the distribution of light from narrow to wide angle. The housing is retained using four countersunk screws.
[Click here to Download PDF Spec] |
|
 |
|
8.33 Cratere LED paver |
|
Cratere is a ground buried drive-over LED uplight designed for marker lighting and for providing intense accent lighting
to architectural details such as columns.
The fixture utilises 36 high output Luxeon LEDs which can be specified in colour changing RGB or single static colours. A
range of optics can be selected to alter the distribution of light from narrow to wide angle. The bezel is manufactured from stainless steel, or from chrome plated / anodised aluminium, and can be supplied with either a bevelled or flat profile. This retains the toughened cover glass, which can be specified as either clear or frosted, and a gasket seals the unit to IP67.
Both circular and square versions are available and optional recessing sleeves can be specified, if required. The fixture
is supplied with a 1.5 metre connection lead.
[Click here to Download PDF Spec] |
|
